平滑窗


TOF 3D sensors

GridScan/Pro SI

GridScan/Pro SI is a highly reliable SIL 2-certified safety light curtain with a serial interface for industrial doors. Certified with an EC-type examination, it can be used in any door. The serial interface allows for the integration of additional functions such as soft stop, increasing the door`s service life.

GridScan/Pro

GridScan/Pro是一款高度可靠的SIL 2认证的工业门安全光幕。通过了欧盟型式试验认证,可在任何门上使用。由于其多输出设计,GridScan/Pro可以集成在所有类型的门控制系统中。

easygard

CEDES easygard100 light curtains are designed in line with the latest elevator door requirements. The products are compliant with the EN81-20 code, offer an excellent performance, and meet highest quality expectations.

cegard/Max custom made

cegard/Max定制版可为多种类型电梯提供检测和安全防护功能。该产品可接受非常少量的完全定制以匹配客户需求。

cegard/Lift

cegard/Lift能有效保护没有轿厢内门的电梯,而又几乎不占用轿厢空间。其智能安装的特性在节省空间的同时又能实现快速、安全的集成。

CEDES Elevate

CEDES Elevate is a cloud-based IoT platform that enables smart elevator management, optimizing service through data-driven maintenance recommendations, and people flow insights.

cegard/Smart ECom solution (data hub)

The cegard/Smart ECom solution bundles passenger safety with exceptional operational efficiency. It combines door safeguarding (compliant with EN 81:20 and A17.1-2019/-2022) with an elevator data hub connecting to our cloud-based IoT platform CEDES Elevate and enabling multimedia emergency communications.

cegard/Smart solution (stand-alone IoT)

The cegard/Smart solution provides door safeguarding (compliant with EN 81:20 and A17.1) and connects to our cloud-based IoT platform CEDES Elevate, allowing for 24/7 elevator health monitoring and people flow analysis.

GridScan/Mini

GridScan/Mini是一款外观小巧的安全等级为2级的光幕产品。其具有的门消隐功能使其可以被集成在门的设计中。配备有FSS输出的系统能在无测试信号的情况下满足EN 13849-1 2类的标准。

RAY-RT

With its adaptable design, RAY-RT can be installed in the most challenging locations of door construction. It is designed for securing various points of the door and due to its compact size, it can even be integrated in the guide rail.

RAYTECTOR RAY-S (pull-in protection)

The safety photo eye is used for entrapment protection on industrial doors, mainly for rolling grills. An interruption of the light beam initiates a signal between emitter and receiver which interrupts the movement of the power operated door.

RAY-M

RAY-M was designed as a light barrier for a small mounting space. It generates the standard OSE signal and can be operated in combination with well known control units. The RAY-M DUO is a double beam light barrier for safeguarding of two parallel areas via one signal.

RAY-N

RAY-N photo eyes are monitored sensors, using the same proven technology as the OPTOEYE. When the signal between emitter and receiver is interrupted, the sensor sends a signal to the operator to stop and reverse the door.

OPTOEYE OPE

The OPTOEYE consists of two infrared sensors inserted into flexible rubber brackets, which are mounted next to the door opening. Installation is very easy since the LEDs indicate alignment and power.

ELS 400

ELS 400光栅的设计非常紧凑小巧,适用于空间有限的门型材。它的宽度非常的小,仅有11.6mm,完全可以匹配所有标准的门型材。

easyray

easyray系列对射光电具有大光阑角度和固定孔,因此非常易于安装。该系列传感器具有响应速度快的特点,非常适用于对传感器要求快速响应时间的应用场合。

IMS 100 NT

IMS100 NT通过对电梯入口区域的监控将电梯安全防护提升到了一个新的高度。降低了门开关的次数,从而提高了电梯运作的效率。

CabSafe™

The 2019 North American Elevator Safety Code (ANSI A17.1-2019 / CSA B44-19) defines new and clarifies existing requirements for the means of detecting persons or objects between the doors (2D) or approaching the elevator (3D). CEDES CabSafe™ system, consisting of a Controller, a 2D light curtain and a 3D TOF sensor, can fulfill all these code requirements and more.

TOFniva

TOFniva能够监控高达2m x 2m的区域,检测是否有人或物体进入。检测区域可以根据特定的应用需求进行设置,不受任何背景干扰

APS

APS是一款非接触式绝对定位系统。其支持的最高速度可达20m/s,最高安装高度可达1500m。作为一款通过了SIL 3认证的产品,其可以被应用于安全相关的功能。

iDiscovery

iDiscovery是一款功能强大的SIL3等级且符合EN 81标准的位置监控单元。与CEDES的APS(绝对定位系统)结合使用,它可以接管与安全相关的电梯功能和电梯设备。

GLS 326

GLS 326槽型光栅具有三道独立的红外光束及输出。内部集成的两个微处理器与电梯控制系统结合能够提供多种应用的同时,又使其极具价格竞争力。

GLS 126 NT

GLS 126 NT是一款槽型光栅,其令人难以置信的重复精度使得电梯定位精度可以达到毫米级别。通过防护等级达IP66的外壳进行完全密封,产品的高光备用确保了防污、防尘、防烟雾。

Cable sets (CS)

OSE cable sets contain a junction box, a spiral cable and cable gland accessories, and hence everything required to connect OSE sensors to a control device. Cable sets are provided with junction boxes and spiral cables in three sizes, each designed for different door types.

Coil cords

Coil cords are commonly used to wire the sensing edge from the moving door panel to the stationary door control unit. This solution is cost efficient and proven to work reliably. The wiring connection from the sensing edge to the coil cord is usually done within the protected environment of a junction box.

Rubber profiles

The hollow rubber profiles enclose the OSE safety light barrier. When the hollow rubber profile is deformed, the optical channel is interrupted, causing a dynamic safety signal to fail. This is detected by the control unit which interrupts the enable circuit. The potentially hazardous movement is halted.

Bumpers

Bumpers are used for long-term protection of horizontally mounted safety contact edges. In a closed state the door leaf sits on the bumpers. These protect the rubber profile and/or the inner optical closing edge device from damage.

Retainer

Most commercial doors are equipped with the proper retainer in order to install a rubber profile. For retro-fitting or door sections without the right retainer, VITECTOR by CEDES offers special retainers for the installation of sensing edges.

Controller OSE-C

For retrofitting older door systems, or for door controls without an integrated "OSE" interface, control units are required for evaluating the signal. All safety light barriers with an OSE signal can be connected to the evaluation units.

Junction boxes (JB)

The junction boxes are available in different sizes (small, medium, large), depending on the desired application. The housing can be opaque or transparent – e.g. the status LED of the safety edge is visible through the translucent lid.

Airwave accessories

Various accessories are available for the airwave switches, such as end and connection plugs, signal hoses made of PVC or silicone and airhose connectors (straight, angled or t-shaped).

UPS - 通用电源

通用电源可为光幕提供24V电源,例如cegard/Mini。范围在20VAC到265VAC或20VDC到375VDC的电压均可被转换。光幕半导体输出端也可以被转换成无源继电器触点。

Offset bracket (AC)

The mounting bracket is installed at half of the total height of the door, then wired up to the operator. This allows the coil cord to stretch only half the lenght.

UPS Plus (通用电源)

通用电源UPS Plus配置有两个无源继电器输出端,可以同时连接两个光幕。输入电压范围从20VAC到265VAC或从20VDC到375VDC。

电源转换器

电源转换器可为传感器提供24V电源电压,例如cegard/Mini。范围从85VAC到265VAC的输入电压均可被转换。传感器的半导体输出也可以被转换为无源继电器触点。

Optical Sensing Edges (OSE, Cat.3)

Safety edges are used wherever moving edges pose a hazard to people. The hazardous areas are protected by hollow rubber profiles. As soon as a person or object touches them, the sensing profile is deformed, and the potentially hazardous movement stops.

Optical Sensing Edges (OSE, Cat.4)

Safety edges are used wherever moving edges pose a hazard to people. The hazardous areas are protected by hollow rubber profiles. As soon as a person or object touches them, the sensing profile is deformed, and the potentially hazardous movement stops.

Optical Sensing Edges (OSE, UL)

Safety edges are used wherever moving edges pose a hazard to people. The hazardous areas are protected by hollow rubber profiles. As soon as a person or object touches them, the sensing profile is deformed, and the potentially hazardous movement stops.

Airwave switch DW

Airwave switches are actuated by pressure waves created by any kind of pressure source. A rubber tube inside the weather seal of the door is used to create a pressure wave. When the pneumatic edge hits an obstacle, a pressure wave is created inside of the tube and this wave is recognized by the switch.

OPTOCHAIN

The OPTOCHAIN is a modular system of sensing edges for the use on automatic doors and machines. It is made up of one master sensing edge and up to four slave safety edges which are connected in series. The master is a low power version of the well-known OPTOEDGE.

OPTOGUARD OGD

The pre-traveling light barrier OPTOGUARD features two telescopic sledges, each of them carrying a pair of photocell-sensors. When touching the ground, the sledge is pushed into the plastic housing tensioning a spring. The shape of the housing forces the sensor arms to perform a 60° rotation when sliding in, eventually locating them in parallel alignment.

ENTRYSENSE (ENS)

Wicket doors in panels of power operated sectional doors must be locked safely in their closing position prior to any operation of the sectional door. This is applicable to fully automated doors as well as to doors in hold-to-run mode. A safe contact must prevent the entire door from moving while the wicket door is not fully closed.

EasyGate IP

The end of 2G and 3G networks is approaching. Transition seamlessly to modern 4G with the EasyGate IP. Connect an analogue elevator communicator to the gateway. This will ensure voice or data (VoIP) communication via a mobile network with an operations centre.
To the top
Close